Are glass table tops expensive?

 Knowledge of glass types

After that let it cool down. This makes the glass have a smooth surface on both sides, glass table top dubai, can see through clearly and give a complete reflection less strength very bright visible from outside This type of glass is therefore suitable to be used as a glass inside the condo rather than outside.

type of glass

1. Ordinary glass (Float Glass)

2. Heat Treated Glass

3. Surface Coated Glass

4. Processed Glass

1. Float Glass

as standard glass used to assemble a door Aluminum windows are divided into two types.

1.1 Clear float glass

It is a mirror formed by melting minerals into liquid. and floats on the molten tin surface. 

1.2 Cut-off float glass

It is a clear float glass that has been added to add more metal. Make it into colors such as tea, blue, green, etc. 

Glass with metal added to absorb heat. It is a good light filter and heat protection to a certain extent. 

This type of glass is therefore suitable for use as an exterior mirror. to help reduce heat It also makes the light look softer and more comfortable. 

As for installation instructions, the glass should not be exposed to the wind from the air conditioner directly, it will cause the glass to lose energy. 

In addition, blackout curtains should not be attached. or placing the hook too close to the mirror because the glass will not be able to emit heat until causing the glass to crack 

Heat Treated Glass

Heat-treated glass or tinted glass that has been processed to adjust the quality of the glass. 

In order to have more strength or to receive more force from external forces, divided into 2 types as follows

1) Tempered Glass

tempered safety glass It is the glass, shower partition in dubai that goes through the Tempering process to increase its strength. 

using a single principle with prestressed concrete is to create a layer of compressive strength on the glass surface to resist external forces 

This is done by heating the glass to a temperature approximately slightly above the softening point of the glass. 650-700 degrees Celsius and make the glass surface cool quickly using cool air blowing Effect of temperature difference between surfaces with the center of the glass plate will cause A layer of compressive strength forms on the surface of the glass on both sides.

It will articulate the middle layer like a sandwich. and this layer of skin will resist the force from within

Outside, the tempered glass is about 4 times stronger.

feature

1) Tensile strength and bending strength when comparing ordinary glass with tempered safety glass.

It has a thickness of 5 mm. ordinary glass has a tensile strength and a force that causes the glass to bend. 500-650 kg/square centimeter in tempered safety glass is up to 1,500 kg/square centimeter

2) Loading Resistance is the resistance to pressure and impact, divided into

- Static Load Resistance is the force that hits the glass. Tempered glass can withstand strong

impact 3-5 times more than ordinary glass of the same thickness

- Impact Load Resistance is the resistance of glass to typical shocks.

New safety glass Tempe Super can shock better than normal glass is approximately 4 times.

3) Safety is Reducing the danger of being cut by glass because of the breakage of safety glass will break into small granules and are less sharp

4) Heat resistance is the resistance of glass to sudden temperature changes.

From the heat resistance test of tempered safety glass compared to ordinary glass with the same thickness of 5 mm.

The results of the test are as follows:

- Tempered glass Able to withstand temperature variations at temperature differences up to about 170 °C, and will begin to crack all when the temperature reaches about 220 degrees Celsius

- Ordinary glass can withstand temperature changes at a temperature difference of only about 60 degrees Celsius and, aluminium maintenance in dubai will break all when the rupture value when the value of the temperature rises to about 100 degrees Celsius.